Biostar H81MHV3 3.0 H81 Intel® H81 LGA 1150 (Socket H3) micro ATX

Kod: PLYBIO1500003
€86,86 Izračunaj cijenu:
Na zalihi
Dostava na:
26.8.2026
Doručení do druhého dne
Dostava sljedeći dan
Na bilo koje mjesto
Garance doručení
Garancija isporuke
Neoštećena roba
Přes 3000 výdejních míst
Preko 3.000 mjesta točenja
Po cijeloj Hrvatskoj

Detaljan opis proizvoda

Nema dostupnog opisa proizvoda

Dodatni parametri

Kategorija: Motherboards Socket-1150
Težina: 0.56 kg
EAN: 4712960685598
Processor manufacturer: Intel
Compatible processor series: Intel® Core™ i5, Intel® Celeron®, Intel® Core™ i7, Intel® Pentium®, Intel® Core™ i3
Maximum number of SMP processors: 1
Processor socket: LGA 1150 (Socket H3)
HDCP: Yes
DirectX version: 11.1
Motherboard form factor: micro ATX
Motherboard chipset family: Intel
Windows operating systems supported: Windows 7, Windows 8.1, Windows 10, Windows 8
Audio chip: Realtek ALC887
Audio output channels: 5.1 channels
Motherboard chipset: Intel® H81
ECC сompatibility: Non-ECC
Memory channels: Dual-channel
Memory slots type: DIMM
Supported memory types: DDR3-SDRAM
Number of memory slots: 2
Supported memory clock speeds: 1600, 1066, 1333
Maximum internal memory: 16 GB
Depth: 190 mm
Width: 170 mm
Ethernet interface type: Gigabit Ethernet
Wi-Fi: No
Ethernet LAN: Yes
Peripheral (Molex) power connectors (4-pin): 1
CPU fan connector: Yes
Front panel connector: Yes
ATX Power connector (24-pin): Yes
Number of SATA III connectors: 2
Front panel audio connector: Yes
USB 2.0 connectors: 2
Number of SATA II connectors: 2
Clear CMOS jumper: Yes
Cables included: SATA
Supported storage drive interfaces: SATA II, SATA III
PS/2 ports quantity: 2
USB 2.0 ports quantity: 2
HDMI ports quantity: 1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity: 2
Ethernet LAN (RJ-45) ports: 1
Headphone outputs: 3
VGA (D-Sub) ports quantity: 1
PCI Express x1 (Gen 2.x) slots: 1
PCI Express x16 (Gen 2.x) slots: 1
Warnings: Dispose of used toner cartridges according to local hazardous waste regulations., Do not place on conductive surfaces or in areas of high humidity., Do not tamper with the design of the board or its components, this risks damaging the equipment.

Rasprava

Budite prvi koji će objaviti članak na ovoj stavci!

Nemojte ispunjavati ovo polje:

Sigurnosna provjera

Objavom komentara prihvaćate GDPR